12-2 (#12-2 conductor) wire doesn't "pull" 20 amps. However, it's ampacity rating is that of 20 amps. #12 copper wire is rated for a total load of 20 amps. So, always use a 20 amp breaker with it.
The voltage has nothing to do with the capacity of a wire to handle current. A #12 copper wire with an insulation factor of 60, 75 or 90 degrees C is rated at 20 amps.
The normal current capacity of 12 AWG copper wire is 20 amps.
The wire rating for a # 12 wire is 20 amps. If you are going to continuously load the circuit you need to de-rate the wire by 80%. This brings the current down to 20 x .8 = 16 amps. The wire rating of a # 10 wire is 30 amps. 30 x .8 = 24 amps.
For a 20 amp breaker, you should use a wire size of 12 AWG for standard residential wiring. This wire size can safely handle the current load without overheating. Make sure to always consult local electrical codes and regulations for specific requirements.
Provided you use wire that is rated for 20 amps.
10 amps
No, a 12/2 wire is typically rated for a maximum of 20 amps.
The maximum current capacity of a 20 amp wire is 20 amps.
The voltage has nothing to do with the capacity of a wire to handle current. A #12 copper wire with an insulation factor of 60, 75 or 90 degrees C is rated at 20 amps.
NEC 310.16 conductor ampacities NEC 240.4(D) For residential installations the smallest wire to be used is 14 AWG (15 amps rating) and for commercial installations the smallest wire to be used is 12 AWG (20 amp rating)
The normal current capacity of 12 AWG copper wire is 20 amps.
The wire rating for a # 12 wire is 20 amps. If you are going to continuously load the circuit you need to de-rate the wire by 80%. This brings the current down to 20 x .8 = 16 amps. The wire rating of a # 10 wire is 30 amps. 30 x .8 = 24 amps.
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
For a 20 amp breaker, you should use a wire size of 12 AWG for standard residential wiring. This wire size can safely handle the current load without overheating. Make sure to always consult local electrical codes and regulations for specific requirements.
Provided you use wire that is rated for 20 amps.
A 14-gauge wire can typically carry up to 15 amps of current, while a 12-gauge wire can handle up to 20 amps. It's important to follow the manufacturer's guidelines and electrical codes when determining the maximum current for a specific wire size.
A #12 copper wire with an insulation factor of 75 or 90 degrees C is rated at 20 amps.A 12 AWG wire should not be connected to a breaker larger than 20 amps. The wire is capable of carrying that current load without overheating and causing fire.