Well that depends, first off pressure is equal to specific gravity times height. P=SG*h. so the pressure due to the water column would be 0.0361 psi given that SG of water = 62.4 lb/ft^3. Then you have to take into consideration any other pressures acting on the water. If the top of the column is open to the air then the absolute pressure would be 14.7321 psi given that atmospheric pressure is 14.696. The basic formula to make this calculation in any situation is P=P0+SG*h where P0 is the pressure above the column.
10" Water Column equals about .4 Pounds per Square Inch or 0.36127291827412783psi exactly.
About 2 1 pound per square inch = 2.0362... inches of mercury
You need to know how high the water column is to calculate the pressure it exerts at its base! For example, a column of water 1 metre deep would exert a pressure of 9.81 kPa at its base (density x gravity x depth - 1000 * 9.81 * 1). This would be equal to approx 1.42 PSI.
Inches of water x 0.03613 equals pounds per square inch (psi).
2.31
27.71 inches of water column equals 1 psi
5 psi is equivalent to 34.47 inches of water column (in wc).
1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
10" Water Column equals about .4 Pounds per Square Inch or 0.36127291827412783psi exactly.
14"
0.25 psig = 413.7 inches of water column
To convert psi (pounds per square inch) to feet of water, you can use the conversion factor: 1 psi is equivalent to approximately 2.31 feet of water. This means that if you have a pressure of 1 psi, it would support a column of water approximately 2.31 feet high.
12.01 psi
10 psi.
One pound per square inch (psi) is equal to approximately 2.31 feet of water. This means that a column of water that is 2.31 feet tall exerts a pressure of 1 psi at its base.
For water, a 60 ft vertical change is equivalent to about 26 psi change. So if the pressure is 60psi at the bottom, it will be 34 psi at the top. See related link.