7 times the square root of 2 feet
The perimeter is 18 feet.
12 square feet
42 square feet
We do not need the height for square feet, is we use that we would have volume. If it is 7 feet wide by 10 feet long it is 70 square feet.
7 feet 6 inches is 7.5 feet Hence Area = 7.5 x 7 = 52.5 square feet
To find the diagonal measurement of a square, you can use the Pythagorean theorem, which states that the square of the hypotenuse (the diagonal) is equal to the sum of the squares of the other two sides. In this case, the diagonal measurement would be the square root of (7^2 + 8^2) = √(49 + 64) = √113. Therefore, the diagonal measurement of a 7 ft by 8 ft square is approximately 10.63 feet.
The question does not give the units of measurement for the room's size. Assuming they are feet, the square footage is 7*17 = 119 square feet.
area is defined as the measurement of the length multiplied by the measurement of the width of the article/item of which you wish to know the area. therefore taking the width of the item to be 10 and the length to be 7 the area is equal to 10 x 7 = 70 squares of the measurement. as the measurement here is in feet then the resultant measurement will be 70 square feet. resultant measurements of the area are always as a square of the measurement, thus if the measure is in inches the resultant would be square inches; if the measurement is in miles the resultant would be square miles, and so forth. additionally the measurement is always indicative of two (2) dimensions.
Acres cannot be converted to feet as they are both different types of measurements. As acres is a measurement of area while feet is a measurement of length. A proper equivalent would be square feet. Therefore, 7 Acres = 304920 Square Feet
Sqrt (256 + 256) = sqrt 64 x sqrt 4 x sqrt 2 = 16 root 2 = just over 22' 7½".
The measurement of 35 square feet is considered to be a small area. These dimensions are 5 by 7 feet. Converted into meters, 35 square feet is the equivalent of 3.2516064 m2.
300 feet is a measurement of DISTANCE, while square feet is a measure of AREA. However, 300 averaged-sized human feet would cover about 100 square feet of area, although the owners of said feet would have to be VERY friendly. It is impossible to determine area from a single linear measurement. You need 300 feet BY some other linear measurement to calculate area.
It depends on what the 7' and 10' refers to. They could be adjacent sides of a rectangle or a parallelogram. If the latter, more information is required before the question can be answered.
The measurement of 35 square feet is considered to be a small area. These dimensions are 5 by 7 feet. Converted into meters, 35 square feet is the equivalent of 3.2516064 m2.
4 feet high by 8 feet wide = diagonal of 107.28 inches.
The length of the diagonal of a square whose side lengths are 7 square root 2 (9.89949494) is: 14 units.
You need to redefine your question. Square footage is a measurement of area whereas "7ft" is a measurement of length. The question makes no sense. Taken at face value, there are 7 square feet in 7 feet. 1ft x 1ft = 1ft.